FPV over a river at sunset from glassfox on Vimeo.
Using the cam switch is really simple, first you should connect it to one of your RC channel, assign a 3 way switch for it. then, at the first start, the red and green LED will flash by turn, turn the switch on your radio up and down for several times for the cam switch to set the end points.the component on the cam switch supports up to 1A current, so if you want to use this cam switch as a LED controller or similar ,make sure it's within 1A limit.
A very compact and multi-purpose cam switcher allowing you to switch views between two cameras. Due to its heavy-duty components, you can even use it as an igniter for your fireworks or as a standard rc switch.
This product was added to our catalog on Tuesday 13 July, 2010.