RD4047 400-470MHZ 8-10CH LRS receiver

Receiver parameter:

Frequency Range 400MHz to 470MHz

Sensitivity :     -112 DBM @0.1EBR(40Hz Refresh rate)
                  -111 DBM @0.1EBR(50Hz Refresh rate)
                  -110 DBM @0.1EBR(66Hz Refresh rate)
                  -108 DBM @0.1EBR(90Hz Refresh rate)
                  -104 DBM @0.1EBR(125Hz Refresh rate)
                  -104 DBM @0.1EBR(166Hz Refresh rate)
                  -101 DBM @0.1EBR(250Hz Refresh rate)

F/S turn on condition : >0.99EBR

Antenna gain : 2.15DBM

Step frequency :10kHz

Bandpass filter:Chip integration
Out-of-band rejection  :No specific data
It can work with video and audio transmitter which frequency less than 300Mhz or higher than 500Mhz .
 

Refresh rate :40Hz50Hz66Hz90Hz125Hz166Hz250Hz

Hopping rate :40Hz50Hz66Hz90Hz125Hz166Hz250Hz

Hopping cycle:13Hz16Hz22Hz30Hz41Hz 55Hz 83Hz

Recover time :77mS62mS45mS33mS24mS 18mS 12mS
        
Response Time : 4mS to 25mS

PWM Output accuracy :0.5uS step ERROR<20PPM

PWM Output range : 0.5mS-2.5mS

PWM output cycle :55Hz  @Normal mode
                  192Hz @Fast mode

PPM Output accuracy :0.5uS step ERROR<20PPM

PPM Output range : 0.5mS-2.5mS Each channel

PPM output cycle :50Hz@Normal mode & 1mS to 2mS Output
                   42Hz to 50Hz  @Normal mode & 0.5mS to 2.5mS Output
                         50Hz to 83Hz  @Fast mode   & 1mS to 2mS Output
                        42Hz to 125Hz @Fast mode   & 0.5mS to 2.5mS Output

PPM sync pulse width:4mS to 16mS  Automatic adjust @Normal mode
                     4mS Locked                    @Fast mode

Recommend Supply Voltage :    3V to 8.4V

Shutdown voltage :2.1(+-0.15)V

Damage voltage   :>15V

Power supply noise cancellation  :<=15 VPP

Reverse breakdown voltage : >-15V

Output ports withstand voltage : >12V

Normal Current : <110mA

Operating Temperature :–40 to +80 °C