0 Items - $0.00
CATEGORIES

CUAV V5+ Flight Controller

SKU: 902192

Availability: In stock ( 15 )

Weight:600g

$350.00

Reward points Earn your 350 reward points.

Qty:

CUAV V5+ is an advanced autopilot designed and made in CUAV. The board of the v5+ is based on the FMUv5 open hardware design, the external interface uses the Dronecode standard pinouts, and the modular design allows the user to design its backplane. It is fully compatible with PX4 and ArduPilot firmware. Mainly used for academic and business development.

 

Specifications:

Processor
-STM32F765 (32-bit ARM Cortex M7,216 Mhz/512 KB RAM/2 MB Flash,512KB RAM)
-STM32F100 (32-bit ARM Cortex-M3, 24MHz, 8KB SRAM)
Sensors
-Accelerometer: ICM-20602/ICM20689/BMI055
-Gyroscope: ICM-20602/ICM20689/BMI055
-Barometer: MS5611
-Magnetometer: IST8310

Interfaces:
-8-14 PWM outputs (6 from IO, 8 from FMU)
-3 dedicated PWM/Capture inputs on FMU
-Dedicated R/C input for CPPM
-Dedicated R/C input for PPM and S.Bus
-analog / PWM RSSI input
-S.Bus servo output
-5 general purpose serial ports
-4 I2C ports
-4 SPI buses
-2 CANBuses with serial ESC
-Analog inputs for voltage / current of 2 batteries

Power
-Operating power: 4.3~5.4V
-USB Input: 4.75~5.25V
-Servo Rail input: 0-36V


Other Characteristics:

Weight: 91g
Dimensions: 42x85.5x33mm
Operating temperature: -20 ~ 80°C

Your Purchase Includes:

1x V5+ Flight Controller
2x Dupont Cable
1x ADC6.6 Cable
2x I2C/CAN Cable
1x SBUS Signal Cable
1x RSSI Cable
1x DSM Signal Cable
1x ADC3.3 Cable
1x Debug Cable
1x Safety Switch with cable
1x Voltage-Current Cable
1x PW-link Module with cable
1x Power Module
1x 16GB Memory Card
1x I2C Expansion Board
1x TTL Small Board

Only registered users can write reviews. Please, log in or register

X close
X close