EH30L is a dual sensor 1km-range-finding 1080P 0.001lux starlight 35x optical zoom camera with 3-axis gimbal, whose measuring deviation is no more than 2m for objects between 3~1000m.
One of highlighted features of EH30L is its GPS positioning that allows you to obtain detailed position of the target (with the OSD module) in a traffic accident, crime fighting, petroleum pipeline surveillance. Mounted on multirotors such as GAIA 160 Elite or RHEA160 Hexacopter, moving target tracking, for example, spying on a suspect, becomes easy when real-time GPS coordinates can be recorded and sent back to ground control station and once object tracking is initiated, there are nowhere run.
When it is suddenly dimmed or lighted in the surroundings, EH30L is able to switch back and forth automatically between day mode and night mode. CMOS 1/1.8″ large image sensor is adopted to allow larger pixels for excellent noise performance to work better in a low-light environment. And when it switches to night mode, image color turns from color to black and white for a better image quality.
EH30L can record smooth 1080P HD video without shake thanks to its ±0.008° 3-axis gimbal and transmits back to GCS through ethernet port.
EH30L can be swapped and replaced with one of a EH640 Series or EH30 Series camera, as they share the same gimbal-mounting board.
With the OSD module, EH30L is able to
1. Work out GPS coordinates of the object with the accuracy of ±5m~±20m for targets between 100m to 500m.
2. Record target coordinates, gimbal attitude and flight altitude and transmit them back to GCS through CAN bus.
3. Realize remote control (sbus control) besides the ground control software operation (ethernet control).
1. Please avoid direct eye contact.
2. Hot plugging(unplugging before powering off) is dangerous and strictly forbidden.
Your Purchase Includes:
1x EH30L Dual Sensor 1km Laser Rangefinder 35x Zoom Camera with 3-axis Gimbal
1x Gateway Damping Plate
1x Network Cable
1x OSD Module
GCS (Gimbal camera control; screen display; change IP address of the camera)
Wincc (needs OSD module) (Channel setting; camera firmware upgrade)
(For parameter configuration, please visit https://www.youtube.com/watch?v=J__o42im5K8)