0 Items - $0.00
CATEGORIES

Foxtech Nimbus VTOL V2 Aircraft for Mapping and Survey

SKU: S80811

Availability: In stock

Weight:1g

$2,199.00

Reward points Earn you 2199 reward points.

$2,199.00
Qty:

 

 

 

 

 

 

Nimbus VTOL Grey Version is a new released version. The new Nimbus is painted in grey color and looks more professional. We also released one battery swapping board-PG20 for Nimbus VTOL. It increased at least 30% flight time of Nimbus VTOL and lowered the discharge rate requirement of the main battery. By using this Dual Battery Swapping Board, we can use one smaller but high discharge rate battery for nimbus take off and land, use one big capacity but low discharge rate battery for cruising in fixed wing mode. And with Foxtech 6S 16000mAh Li-ion Battery and PG20, the flying time is about 80min. Nimbus VTOL equipped with PG20 battery swapping board can complete 6 square kilometer area mapping job in a single flight. Since there are 2 batteries onboard, in case one goes wrong, the other one will replace it immediately. 

Foxtech Nimbus V2 is a Vertical Take-off and Landing airplane, in this version, we equip 28kg high speed tilting servos, with the newly upgraded system, the plane can hover like a multicopter more steadily and take off and land in very heavy wind.

The highlight of Nimbus V2 is the wind resistant feature. It means that when the plane is in multicopter positioning mode, or in Auto mode, during taking off and landing stage, the two tilting motors will tilt to a certain level to compensate the wind, that keeps your plane much stable and also give you much better safty during landing and taking off stage. With the newly upgraded motors, the max flying speed can reach 35m/s, the average speed is 15m/s to 16m/s, and the stall speed is 10m/s-11m/s

Another new feature is the new radio control-DA16S, specially designed for VTOL like this Nimbus, and also suitable for other Foxtech series drones. It is 16-channel radio which has datalink and radiolink built inside, so both the datalink and radiolink can reach a range of 5km. You also could equip the DA16S with RB20 signal relay  and high-quality antenna to increase the distance to 15km-30km.

The radio also has the Bluetooth function, which can send the data to your cellphone. So you can see all parameters or setting on you cellphone, also could use usb to link the radio to your laptop, it is very convenient.

Nimbus VTOL V2 also has a big inner space, can put lots of batteries and other equipments. And the quick-detached design makes Nimbus VTOL easy to assembly and dissembly, and transport.

This Nimbus V2 can be equipped with Foxtech Map-01 and Map-A7R mapping cameras to do mapping jobs, when you use this Nimbus to do mapping, also could equipped Nimbus with RTK, and PPK system to increase the map precision.

Foxtech Nimbus VTOL V2 is a cost-effective plane compared with other expensive multicopters or fixedwings, it is a good option for customers to do mapping jobs and long range inspection.

 

Specifications:

Version: Nimbus VTOL V2
Wingspan: 1800mm
Length: 1300mm
Suggested Take-off Weight: 4.8kg
Suggested Payload: 800g
Total Weight: 2.85kg(no battery)
Max. Flying Height: 3500m
Max. Flying Speed: 35m/s
Average Speed: 15m/s to 16m/s
Stall Speed: 10m/s to 11m/s
Max Wind Resistance: ≤10.7m/s
Mapping Accuracy: Centimeter

Suggested Battery: 6S 12000mah Lipo Battery; 6S 16000mAh Li-ion Battery and 6S 2200mAh Lipo Battery


Features:

-Take off and land vertically like a multicopter.
-Great Wind Resistant Feature
-Go waypoints & click-go automatically in either fixed wing or multicopter mode.
-No launching rail or parachute needed, launching directly from an area as small as 4x4m
-Do mapping jobs by designing in ground station.
-In case there is any failure on ailerons, elevators, Nimbus VTOL mapping version can switch to multicotper mode to save the plane.



Your Purchase Includes:

 

PNP(DA16S+ White/Grey Version):

1x Nimbus VTOL V2 White Version/Grey Version
2x 28kg Servo
2x Foxtech 3520 KV520
1x Foxtech X5008 KV330
1x Hobbywing XRotor 40A ESC(no BEC)
2x Hobbywing XRotor Pro 50A
1x Pair 1380 Wooden Propeller
1x 1755 MARKII Matte Propeller
1x Px4 Air Speedometer
1x ASSAN 8A UBEC
1x Foxtech DA16S+ 16-Channel Radio Controller
1x Foxtech PG20 Dual Battery Swapping Board
1x Pixhawk 2.1 Standard Set with Here GNSS
1x Assembling, tuned and Flying Test Service 

 

PNP(T12 Combo White/Grey Version):

1x Nimbus VTOL V2 White Version/Grey Version
2x 28kg Servo
2x Foxtech 3520 KV520
1x Foxtech X5008 KV330
1x Hobbywing XRotor 40A ESC(no BEC)
2x Hobbywing XRotor Pro 50A
1x Pair 1380 Wooden Propeller
1x 1755 MARKII Matte Propeller
1x Px4 Air Speedometer
1x ASSAN 8A UBEC
1x T12 12-Channel Radio Controller
1x Foxtech PG20 Dual Battery Swapping Board

1x Pixhawk 2.1 Standard Set with Here GNSS
1x Assembling, tuned and Flying Test Service

 

RB20 Long Range Combo(White/Grey Version):

1x Nimbus VTOL V2 White Version/Grey Version
2x 28kg Servo
2x Foxtech 3520 KV520
1x Foxtech X5008 KV330
1x Hobbywing XRotor 40A ESC(no BEC)
2x Hobbywing XRotor Pro 50A
1x Pair 1380 Wooden Propeller
1x 1755 MARKII Matte Propeller
1x Px4 Air Speedometer
1x ASSAN 8A UBEC
1x DA16S+ Radio Controller with RB20 Signal Relay System
1x Foxtech PG20 Dual Battery Swapping Board
1x Pixhawk 2.1 Standard Set with Here GNSS
1x Assembling, tuned and Flying Test Service

 

RTK/PPK Combo:

1x Nimbus VTOL V2 White Version/Grey Version
2x 28kg Servo
2x Foxtech 3520 KV520
1x Foxtech X5008 KV330
1x Hobbywing XRotor 40A ESC(no BEC)
2x Hobbywing XRotor Pro 50A
1x Pair 1380 Wooden Propeller
1x 1755 MARKII Matte Propeller
1x Px4 Air Speedometer
1x ASSAN 8A UBEC
1x Foxtech DA16S+ 16-Channel Radio Controller
1x Foxtech PG20 Dual Battery Swapping Board
1x Pixhawk 2.1 Standard Set with Here GNSS
1x RTK/PPK System
1x Assembling, tuned and Flying Test Service

 

Optional:

RB20 Signal Relay 

Foxtech Map-01 Mapping Camera

Foxtech Map-A7R Full-Frame Mapping Camera with 35mm Lens

Mapping Camera Mounting Plate

Foxtech 6S 16000mAh Li-ion Battery and 6S 2200mAh Lipo Battery

Manual Download

 


Mission Planner Menu Items Setting Tips

 

Firmware Update Notice:

If you need to update your Pixhawk FC to the latest version, please follow the steps:

1)Install firmware (ArduPlane)

2)Recover your Nimbus parameters to the FC (There is a param. document in the SD card)

3)Do not change any data in the flight controller. Please recover the parameter again if by any chance your FC data is changed. 

Each Nimbus VTOL parameter is exclusive due to difference of servos etc.

Note: Please read the Nimbus Manual and Mission planner param.document etc. in the SD card before flying.

 

Only registered users can write reviews. Please, log in or register

X close
X close