0 Items - $0.00

Warrior 280 Quadcopter PNP red

SKU: 002105

Availability: In stock ( 1 )


Regular Price: $262.00

Special Price $78.60

save  70%

Reward points Earn you 79 reward points.


Note: the appointed delivery method is DHL&EMS.

Warrior 280 is designed to be a racing quadcopter. With all-in-one power system setup and carbon fiber frame, the Warrior 280 features light weight and fast speed. The assembled kit containing carbon fiber frame, camera, motors, propellers, transmitter(5.8G 32CH 600mW), power distribution board and all hardwares weights at only 340-360g(not including battery). The light weight enables the Warrior 280 to maximize speed and power. Equipped with 2204 2150KV motors, 6 inch propellers and all-in-one power system built on board, this assembled kit simplifies the cabling and reduces time for soldering. It is compatible with most remote controllers in the market. The beautiful canopy makes your quadcopter stand out in the crowd. With this small drone, you will be the No.1 in quad racing!

- All-in-one power system, light weight, fast speed
- Most remote controllers in the market supported
- Assembled kit, reducing time for soldering
- 1.5mm pure carbon fiber material, 3mm thickness carbon fiber arm
- Adjustable 32CH 5.8G 600mW video transmitter
- Adjustable LED power output
- Built-in XT 60 socket for power input
- Controllable buzzer

- Wheelbase: 280mm
- Size: 225*240*70mm
- Weight: 350g(without battery)
- Battery: 3-4S 1400-2300mAh Lipo Battery
- Speed: 50-60km/h
- Fly time: Approx.10mins
- Working temperature: -10℃~+40℃

Camera specifications:
- Horizontal resolution: 700TVL
- Video format: PAL/NTSC
- Video output: 1.0Vp-p/75Ω
- Power input: DC 5V/12V

Your purchase includes:
- 1*Warrior 280 quadcopter frame
- 4*6 inch propeller
- 4*2204 2150KV motor
- 1*Power distribution board
- 4*20A ESC(simonK firmware)
- 1*Open Pilot CC3D flight controller
- 1*5.8G 32CH 600mW transmitter
- 1*Buzzer
- 1*5V/12V FPV camera
- 1*XT60 plug
- 4*Foam landing skid
- 1*Antenna 
- 1*Canopy
Note: The ESCs, CC3D FC, buzzer and transmitter are built on the power distribution board.

Manual Download

Warning: The CC3D is mounted in the opposite direction, the Roll figure should be set as 180.

Customer Reviews

1 Item(s)

per page
Great customer support Review by Costa Souza
I bought the Warrior 280 Quadcopter PNP, but I had a little problem with the CC3D controller, it lost connected with the software assistance and not able to save settings. I spent a lot time trying to fix it but no luck. So i contacted Foxtech online support. The support guy requested me to offer him/her some screenshots of the software and a short video of the problem, I did then they confirm it is a dead a FC and sent me new controller. All problem solved very fast, i am happy with foxtech support :) (Posted on 7/14/2016)

1 Item(s)

per page

Only registered users can write reviews. Please, log in or register

X close
X close