FrSky Power Switch Replacement for Taranis X9D

This is an replacement power switch module for the FrSky Taranis X9D transmitter. This part has the integrated NiMH 2000mAh charge circuit.
Operation Instructions: Remove the screws from the back of the Taranis, unplug the white ribbon cables from the back of the LCD/switch board at the lower half and open from the bottom so the back of the case swings over the antenna. Four screws hold the board onto the fascia, 3 sets of plugs need to be removed.The two smaller plugs are locking types so please do not pull them out by the wires. You will need to use a small flat blade screwdriver to release them from the sockets, open up the split side of the socket and remove the plug.